RCI-200-CEL: Cellular Remote Control Signal Interface    specsheet

Features: 2 Analog Inputs (0-20mA) 2 Analog Outputs (0-20mA) Bi-directional Communication using Cellular Network Dial-Out Programmable for: Status/Setpoint Change, Incremental Signal Change and Timed Interval Point-to-Point or Host-to-Multi-Point Operation 2 Dry Contact and 2 Analog Inputs 2 'C' Relay Contacts and 2 Analog Outputs Configurable to Initiate and/or Answer A Call Available Carriers: AT&T, T-Mobile Industry Standard MODBUS Communcation No Calibration Required Microprocessor Controlled for High Accuracy Power: 117 VAC 50/60 Hz (Optional 24 VDC) Built-in Overvoltage Protection on Telephone Line High Noise Rejection CSA and NRTL Approved (LR51078)

Function:

The RCI-200-CEL is a bi-directional cellular communication system that exchanges the status of 2 dry contact inputs and 2 analog inputs between a host and remote unit or a PC equipped with a modem. A basic system consists of A) one host station and one or more remote station(s) OR B) several remote stations and one PC with a cellular modem.

In system A), the host unit can be set to interrogate the remote unit(s) periodically or when required. Remote units may also be configured to call the host when required. One host may operate several remote units.

In system B), a PC can call several remote units or alternately, remote units may call the PC when required

LabVIEW drivers are provided for user software development on PC’s.

  

Specifications: Input: (2) 0-20mA & (2) Dry contacts Output: (2) 0-20mA & (2) 'C' Contacts Transmission Delay: 5 sec. max., 1 sec. typ. Transmission Medium: Analog Voice Grade Phone Line Cellular Network: GPRS Operating Temperature: -20 Deg.C. to +50 Deg.C. Relay Contacts: 10A 1/8Hp @ 125VAC, 6A 1/8Hp @ 277VAC Power: 117 VAC, 60/50 Hz (24VDC Available) Enclosure: NEMA4X (NEMA12 available as an option)